|
Large hopper intake area
Auger trough distributor
Large transition opening
Heavy 8-paddle fan
Power paddle design
Sharpened shear bar
Heavy pto drive line
 Auger
trough distributor moves the flow of material into the
fan housing faster.
Large
transition opening allows a smoother flow of material
into the fan.
Large
hopper area increases blower capacity and allows easy
forage box positioning.
12"
diameter auger feeds forage into the fan at 30° angle.
Inserts material into the air stream at nearly the same
plane as rotation for greater efficiency.
Flexible
wind guards on hopper sides keep clean-up to a minimum.
Auger
clutch handle operable from front, side and rear of
blower.
Water
hose connection directs nozzle at auger end. A second
inlet is positioned through the blower band.
KevlarŪ
drive belts last longer and are less susceptible to
stretching.
Heavy
duty PTO drive line is shear bolt protected.
Transport
wheels are equipped with tapered roller bearings.
|
Blower
outlet easily removable for quick inspection and maintenance,
without loosening housing band.
60"
diameter impeller housing. Heavy eight-paddle fan and
rotating back plate provide non-stop filling and virtually
eliminate plugging. Paddles made from 40/50 carbon steel to
resist wear and corrosion.
Sharpened
adjustable shear bar keeps paddle tips clean. Prevents
hair-pinning, carry-over and power loss. All material goes
up the pipe.
Reversible
housing band.
Convenient
shield lock-up.
Automatic
air intake adjustment.
PTO
supported and restrained for transport.
Adjustable
hitch with jack stand.
Convenient
screw jack wheel height adjustment. 4.80 x 8 wheels and
tires. |
 Power
Paddle Design...
Engineering tests show that 35° paddle angle generates a
greater air stream, moving more material with less power.
 1000
RPM Blower...
Optional.
Now available for use with larger HP tractors with 1000
RPM PTO shafts. Requires minimum 140 PTO HP tractor.
1-3/8" 21 spline
1-3/4"
20 spline (opt)
|
Model
200 - Series II
|
| Housing
Diameter |
60" |
| Blower
Housing Width |
9" |
| Number
of Paddles |
8 |
Blower
Outlet Size
(pipe flange) |
9" |
Operating
Speed-540 RPM
Operating Speed-1000 RPM |
540-600
RPM
975-1010 RPM |
Tip
Speed @540 RPM
Tip Speed @1000 RPM |
8640
FPM
10,400 FPM |
| Minimum
HP - 1000 RPM |
140
HP |
| Hopper
Auger Size |
12" |
| Hopper
Width |
37" |
| Hopper
Height from Ground |
| without
wheels |
20
1/2" |
| with
wheels |
27
1/2" |
| Hopper
Height from Ground to pipe flange |
| without
wheels |
67" |
| with
wheels |
74" |
| Weight
(approx)-540 RPM |
1580
lbs |
| Weight
(approx)-1000 RPM |
1900
lbs |
| Wheels
& Tires |
4.80
x 8 |
|
